Chakra_Linux/core
1
0
Fork 0
mirror of https://gitdl.cn/https://github.com/chakralinux/core.git synced 2025-02-19 13:45:35 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
b356f69c26
core/chakra-initscripts/etc/rc.sysinit

762 lines
22 KiB
Bash
Raw Blame History

#!/bin/bash
#
# /etc/rc.sysinit
#
. /etc/rc.conf
. /etc/rc.d/functions
# clear screen
# (we can do that safely in the live system)
/usr/bin/clear
#F Print header
f_header
#Start sysinit
run_hook sysinit_start
# export standard PATH (will be overridden later when /etc/profile is sourced, but is usefull for UDev)
export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
# mount /proc, /sys and our RAM /dev
/bin/mountpoint -q /proc || /bin/mount -n -t proc proc /proc -o nosuid,noexec,nodev
/bin/mountpoint -q /sys || /bin/mount -n -t sysfs sysfs /sys -o nosuid,noexec,nodev
if ! /bin/mountpoint -q /dev; then
if grep -q devtmpfs /proc/filesystems 2>/dev/null; then
/bin/mount -n -t devtmpfs udev /dev -o mode=0755,size=10M,nosuid
else
/bin/mount -n -t tmpfs udev /dev -o mode=0755,size=10M,nosuid
fi
fi
# start up our mini logger until syslog takes over
/sbin/minilogd
# anything more serious than KERN_WARNING goes to the console
# 'verbose' cmdline parameter enables more messages
if /bin/grep -q " verbose" /proc/cmdline; then
/bin/dmesg -n 8
else
/bin/dmesg -n 3
fi
HWCLOCK_PARAMS="--hctosys"
case $HARDWARECLOCK in
UTC) HWCLOCK_PARAMS+=" --utc";;
localtime) HWCLOCK_PARAMS+=" --localtime";;
*) HWCLOCK_PARAMS="";;
esac
if [[ $HWCLOCK_PARAMS ]]; then
# enable rtc access
/sbin/modprobe -q -a rtc-cmos rtc genrtc
# If devtmpfs is used, the required RTC device already exists now
# Otherwise, create whatever device is available
if ! [[ -c /dev/rtc || -c /dev/rtc0 ]]; then
for dev in /sys/class/rtc/rtc0/dev /sys/class/misc/rtc/dev; do
[[ -e $dev ]] || continue
IFS=: read -r major minor < "$dev"
/bin/mknod /dev/rtc c $major $minor
done
fi
# Do a clock set here for a few reasons:
# 1. Make creation time on udev nodes sane (FS#8665)
# 2. Filesystem checks can depend on system time
# 3. This will set the clock, if using non-UTC, off the last known
# configured timezone. Any new timezone put in rc.conf is copied over at
# a later time.
# This does *NOT* take into account a time adjustment file as /var may not be
# mounted yet. A second set occurs later to match rc.conf.
if [[ -f /etc/localtime ]]; then
/sbin/hwclock $HWCLOCK_PARAMS --noadjfile
fi
fi
echo > /proc/sys/kernel/hotplug
stat_busy "Starting UDev Daemon"
/sbin/udevd --daemon
stat_done
run_hook sysinit_udevlaunched
# Trigger udev uevents
if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
stat_busy "Triggering UDev uevents"
/sbin/udevadm control --property=STARTUP=1
/sbin/udevadm trigger --action=add --type=devices
/sbin/udevadm trigger --action=add --type=subsystems
stat_done
fi
# Load modules from the MODULES array defined in rc.conf
mods=${MODULES[@]/!*/}
if [[ $load_modules != off && -f /proc/modules && $mods ]]; then
stat_busy "Loading Modules"
/sbin/modprobe --all $mods
stat_done
fi
unset mods
# Wait for udev uevents
if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
stat_busy "Waiting for UDev uevents to be processed"
/sbin/udevadm settle
/sbin/udevadm control --property=STARTUP=
stat_done
fi
run_hook sysinit_udevsettled
# bring up the loopback interface
[[ -d /sys/class/net/lo ]] && \
status "Bringing up loopback interface" /sbin/ifconfig lo 127.0.0.1 up
# If necessary, find md devices and manually assemble RAID arrays
if [[ -f /etc/mdadm.conf ]] && /bin/grep -q ^ARRAY /etc/mdadm.conf; then
status "Activating RAID arrays" /sbin/mdadm --assemble --scan
fi
activate_vgs
# Set up non-root encrypted partition mappings
if [[ -f /etc/crypttab && $CS && -n $(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$) ]]; then
/sbin/modprobe -q dm-crypt 2>/dev/null
stat_busy "Unlocking encrypted volumes:"
do_unlock() {
# $1 = requested name
# $2 = source device
# $3 = password
# $4 = options
stat_append "${1}.."
local open=create a="$1" b="$2" failed=0
# Ordering of options is different if you are using LUKS vs. not.
# Use ugly swizzling to deal with it.
# isLuks only gives an exit code but no output to stdout or stderr.
if $CS isLuks "$2" 2>/dev/null; then
open=luksOpen
a="$2"
b="$1"
fi
case $3 in
SWAP)
local _overwriteokay=0
if [[ -b $2 && -r $2 ]]; then
# This is DANGEROUS! If there is any known file system,
# partition table, RAID or LVM volume on the device
# we don't overwrite it.
#
# 'blkid' returns 2 if no valid signature has been found.
# Only in this case we should allow overwriting the device.
#
# This sanity check _should_ be sufficient, but it might not.
# This may cause dataloss if it is not used carefully.
/sbin/blkid -p "$2" &>/dev/null
if [[ $? -eq 2 ]]; then
_overwriteokay=1
fi
fi
if [[ $_overwriteokay -eq 0 ]]; then
false
elif $CS -d /dev/urandom $4 $open "$a" "$b" >/dev/null; then
stat_append "creating swapspace.."
/sbin/mkswap -f -L $1 /dev/mapper/$1 >/dev/null
fi;;
ASK)
printf "\nOpening '$1' volume:\n"
$CS $4 $open "$a" "$b" < /dev/console;;
/dev*)
ckdev=${3%%:*}
cka=${3#*:}
ckb=${cka#*:}
cka=${cka%:*}
ckfile=/dev/ckfile
ckdir=/dev/ckdir
case ${cka} in
*[!0-9]*)
# Use a file on the device
# cka is not numeric: cka=filesystem, ckb=path
/bin/mkdir ${ckdir}
/bin/mount -r -t ${cka} ${ckdev} ${ckdir}
/bin/dd if=${ckdir}/${ckb} of=${ckfile} >/dev/null 2>&1
/bin/umount ${ckdir}
/bin/rmdir ${ckdir};;
*)
# Read raw data from the block device
# cka is numeric: cka=offset, ckb=length
/bin/dd if=${ckdev} of=${ckfile} bs=1 skip=${cka} count=${ckb} >/dev/null 2>&1;;
esac
$CS -d ${ckfile} $4 $open "$a" "$b" >/dev/null
/bin/dd if=/dev/urandom of=${ckfile} bs=1 count=`stat -c %s ${ckfile}` conv=notrunc >/dev/null 2>&1
rm ${ckfile};;
/*)
$CS -d "$3" $4 $open "$a" "$b" >/dev/null;;
*)
echo "$3" | $CS $4 $open "$a" "$b" >/dev/null;;
esac
if (($? != 0)); then
failed=1
stat_append "failed "
else
stat_append "ok "
fi
return $failed
}
crypto_unlocked=0
if read_crypttab do_unlock; then
stat_done
else
stat_fail
fi
if [[ ${crypto_unlocked} -eq 1 ]]; then
# Maybe someone has LVM on an encrypted block device
activate_vgs
fi
fi
status "Mounting Root Read-only" /bin/mount -n -o remount,ro /
FORCEFSCK=
[[ -f /forcefsck ]] && FORCEFSCK="-- -f"
NETFS="nonfs,nonfs4,nosmbfs,nocifs,nocodafs,noncpfs,nosysfs,noshfs,nofuse,nofuseblk,noglusterfs"
fsck_reboot() {
echo "Automatic reboot in progress..."
/bin/umount -a
/bin/mount -n -o remount,ro /
/sbin/reboot -f
exit 0
}
if [[ -x /sbin/fsck ]]; then
stat_busy "Checking Filesystems"
FSCK_OUT=/dev/stdout
FSCK_ERR=/dev/stdout
FSCK_FD=
run_hook sysinit_prefsck
/sbin/fsck -A -T -C$FSCK_FD -a -t "$NETFS,noopts=_netdev" $FORCEFSCK >$FSCK_OUT 2>$FSCK_ERR
fsckret=$?
if ((fsckret > 1)); then
stat_fail
fi
run_hook sysinit_postfsck
if (( ( fsckret & 2) == 2)); then
echo
echo "********************** REBOOT REQUIRED *********************"
echo "* *"
echo "* The system will be rebooted automatically in 15 seconds. *"
echo "* *"
echo "************************************************************"
echo
/bin/sleep 15
fsck_reboot
elif ((fsckret > 1 && fsckret != 32)); then
echo
echo "***************** FILESYSTEM CHECK FAILED ****************"
echo "* *"
echo "* Please repair manually and reboot. Note that the root *"
echo "* file system is currently mounted read-only. To remount *"
echo "* it read-write type: mount -n -o remount,rw / *"
echo "* When you exit the maintenance shell the system will *"
echo "* reboot automatically. *"
echo "* *"
echo "************************************************************"
echo
/sbin/sulogin -p
fsck_reboot
fi
stat_done
fi
stat_busy "Mounting Local Filesystems"
/bin/mount -n -o remount,rw /
if [ -x /bin/findmnt -a -e /proc/self/mountinfo ]; then
/bin/findmnt -rnu -o SOURCE,TARGET,FSTYPE,OPTIONS >| /etc/mtab
else
cat /proc/mounts >| /etc/mtab
fi
run_hook sysinit_premount
# now mount all the local filesystems
/bin/mount -a -t $NETFS -O no_netdev
stat_done
# enable monitoring of lvm2 groups, now that the filesystems are mounted rw
if [[ $USELVM =~ yes|YES && -x /sbin/lvm && -d /sys/block ]]; then
stat_busy "Activating monitoring of LVM2 groups"
if /sbin/vgchange --monitor y >/dev/null; then
stat_done
else
stat_fail
fi
fi
status "Retrying failed UDev events" /sbin/udevadm trigger --action=add --type=failed
status "Activating Swap" /sbin/swapon -a
stat_busy "Configuring System Clock"
if [[ $TIMEZONE && -e /usr/share/zoneinfo/$TIMEZONE ]]; then
/bin/rm -f /etc/localtime
/bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
fi
clock_pid=""
if [[ $HWCLOCK_PARAMS ]]; then
# This time, we set the clock for real. Use the adjustment file now that
# /var will definitely be available, and then set the system clock once
# the hardware clock has been adjusted accordingly. The backgrounding magic
# is due to the fact that the second call to hwclock will almost always
# take ~1 second because of the clock granularity, and we might as well
# stay busy.
(
/sbin/hwclock --adjust
/sbin/hwclock $HWCLOCK_PARAMS
) &
clock_pid=$!
fi
stat_done
RANDOM_SEED=/var/lib/misc/random-seed
if [[ -f $RANDOM_SEED ]]; then
stat_busy "Initializing Random Seed"
/bin/cat $RANDOM_SEED > /dev/urandom
stat_done
fi
stat_busy "Removing Leftover Files"
/bin/rm -f /etc/nologin &>/dev/null
/bin/rm -f /etc/shutdownpid &>/dev/null
/bin/rm -f /var/lock/* &>/dev/null
/bin/rm -rf /tmp/* /tmp/.* &>/dev/null
/bin/rm -f /forcefsck &>/dev/null
[[ -d /var/run ]] && /usr/bin/find /var/run/ \! -type d -delete
: >| /var/run/utmp
/bin/chmod 0664 /var/run/utmp
# Keep {x,k,g}dm happy with xorg
/bin/mkdir -m1777 /tmp/.{X11,ICE}-unix
stat_done
#status "Updating Shared Library Links" /sbin/ldconfig
if [[ $HOSTNAME ]]; then
status "Setting Hostname: $HOSTNAME" /bin/hostname "$HOSTNAME"
fi
# Set the NIS domain name, if necessary
[[ -f /etc/conf.d/nisdomainname ]] && . /etc/conf.d/nisdomainname
if [[ $NISDOMAINNAME ]]; then
status "Setting NIS Domain Name: $NISDOMAINNAME" /bin/nisdomainname "$NISDOMAINNAME"
fi
status "Updating Module Dependencies" /sbin/depmod -A
# Flush old locale settings
: >| /etc/profile.d/locale.sh
/bin/chmod 755 /etc/profile.d/locale.sh
#
# hack to be able to set the locale on bootup
#
COUNTRY=`get_country`
[ -n "$COUNTRY" ] || COUNTRY="enus"
case "$COUNTRY" in
ast)
# Asturian
LOCALE="ast_ES.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
XKEYMAP="es"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"es"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
at)
# Austrian
LOCALE="de_AT.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Vienna"
KEYMAP="de"
XKEYMAP="de"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"de"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
be)
# Belarusian
LOCALE="be_BY.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Brussels"
KEYMAP="be"
XKEYMAP="be"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"be"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
bg)
# Bulgarian
LOCALE="bg_BG.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Sofia"
KEYMAP="bg"
XKEYMAP="bg"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"bg"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
ca)
# Catalan
LOCALE="ca_ES.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
XKEYMAP="es"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"es"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
cs)
# Czech
LOCALE="cs_CZ.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Prague"
KEYMAP="cz-lat2"
XKEYMAP="cz"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"cz"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
de)
# German
LOCALE="de_DE.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Berlin"
KEYMAP="de"
XKEYMAP="de"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"de"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
dk)
# Danish
LOCALE="da_DK.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Copenhagen"
KEYMAP="dk"
XKEYMAP="dk"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"dk"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
engb)
# British
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/London"
KEYMAP="us"
XKEYMAP="us"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"us"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
enus)
# English
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
XKEYMAP="us"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"us"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
es)
# Spain
LOCALE="es_ES.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
XKEYMAP="es"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"es"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
eu)
# Basque
LOCALE="eu_ES.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
XKEYMAP="es"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"es"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
fi)
# Finland
LOCALE="fi_FI.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Helsinki"
KEYMAP="fi"
XKEYMAP="fi"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"fi"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
fr)
# France
LOCALE="fr_FR.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Paris"
KEYMAP="fr"
XKEYMAP="fr"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"fr"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
gl)
# Galician
LOCALE="gl_ES.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
XKEYMAP="es"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"es"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
hu)
# Hungary
LOCALE="hu_HU.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Budapest"
KEYMAP="hu"
XKEYMAP="hu"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"hu"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
hr)
# Croatian
LOCALE="hr_HR.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Zagreb"
KEYMAP="hr"
XKEYMAP="hr"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"hr"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
it)
# Italy
LOCALE="it_IT.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Rome"
KEYMAP="it"
XKEYMAP="it"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"it"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
ja)
# Japanese
LOCALE="ja_JP.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Tokyo"
KEYMAP="us"
XKEYMAP="us"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"us"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
nl)
# Dutch
LOCALE="nl_NL.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
XKEYMAP="us"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"us"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
no)
# Norway
LOCALE="nb_NO.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Oslo"
KEYMAP="no"
XKEYMAP="no"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"no"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
pl)
# Poland
LOCALE="pl_PL.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Warsaw"
KEYMAP="pl"
XKEYMAP="pl"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"pl"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
ptbr)
# Brazilian Portuguese
LOCALE="pt_BR.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="America/Sao_Paulo"
KEYMAP="br-abnt2"
XKEYMAP="pt"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"br"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
ru)
# Russia
LOCALE="ru_RU.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Moscow"
KEYMAP="ru"
XKEYMAP="ru"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"ru"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
sk)
# Slovak
LOCALE="sk_SK.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Bratislava"
KEYMAP="sk"
XKEYMAP="sk"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"sk"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
sl)
# Slovenian
LOCALE="sl_SI.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Ljubljana"
KEYMAP="slovene"
XKEYMAP="si"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"si"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
sr)
# Serbian
LOCALE="sr_RS.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Belgrade"
KEYMAP="sr"
XKEYMAP="sr"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"sr"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
tr)
# Turkish
LOCALE="tr_TR.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Istanbul"
KEYMAP="tr"
XKEYMAP="trq"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"tr"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
vcia)
# Catalan (valencia)
LOCALE="ca_ES.utf8@valencia"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
XKEYMAP="es"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"es"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
zhcn)
# Simplified Chinese
LOCALE="zh_CN.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Shanghai"
KEYMAP="us"
XKEYMAP="us"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"us"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
*)
# American
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
XKEYMAP="us"
# add HAL config for Xorg input stuff
cp -f /etc/skel/10-keyboard.conf /etc/X11/xorg.conf.d/10-keyboard.conf
sed -i "/XkbLayout/ s/us/"us"/" /etc/X11/xorg.conf.d/10-keyboard.conf
;;
esac
# Set user defined locale
[[ $LOCALE ]] || LOCALE="en_US"
stat_busy "Setting Locale: $LOCALE"
echo "export LANG=$LOCALE" >>/etc/profile.d/locale.sh
stat_done
if [[ ${LOCALE,,} =~ utf ]]; then
stat_busy "Setting Consoles to UTF-8 mode"
# UTF-8 consoles are default since 2.6.24 kernel
# this code is needed not only for older kernels,
# but also when user has set vt.default_utf8=0 but LOCALE is *.UTF-8.
for i in /dev/tty[0-9]*; do
/usr/bin/kbd_mode -u < ${i}
printf "\033%%G" > ${i}
done
echo 1 > /sys/module/vt/parameters/default_utf8
stat_done
[[ $KEYMAP ]] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q -u "$KEYMAP"
else
stat_busy "Setting Consoles to legacy mode"
# make non-UTF-8 consoles work on 2.6.24 and newer kernels
for i in /dev/tty[0-9]*; do
/usr/bin/kbd_mode -a < ${i}
printf "\033%%@" > ${i}
done
echo 0 > /sys/module/vt/parameters/default_utf8
stat_done
[[ $KEYMAP ]] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q $KEYMAP
fi
# Set console font if required
set_consolefont
# Adding persistent network/cdrom generated rules
for f in cd net; do
[[ -f /dev/.udev/tmp-rules--70-persistent-$f.rules ]] || continue
stat_busy "Adding persistent $f udev rules"
/bin/cat "/dev/.udev/tmp-rules--70-persistent-$f.rules" >> "/etc/udev/rules.d/70-persistent-$f.rules"
stat_done
done
/bin/dmesg >| /var/log/dmesg.log
# final hwclock setting needs to be done at this point
if [[ $clock_pid ]]; then
wait $clock_pid
fi
run_hook sysinit_end
# End of file
# vim: set ts=2 sw=2 noet:
Reference in New Issue View Git Blame Copy Permalink