new version, prepared for systemd

zramswap/PKGBUILD

@@ -4,16 +4,25 @@
 # Maintainer: george <george[at]chakra-project[dot]org>
 
 pkgname=zramswap
-pkgver=0.2
+pkgver=0.3
 pkgrel=1
 pkgdesc="Sets up zram swap devices on boot."
 arch=('any')
 url="http://www.webupd8.org/2011/10/increased-performance-in-linux-with.html"
 license=('GPL')
-install=$pkgname.install
+install=${pkgname}.install
-source=('zramswap.rc.d')
+source=('zram.service'
-md5sums=('630d83824f13b192721a113aad862c57')
+        'zram'
+        'zramstart'
+        'zramstop')
+sha256sums=('3a921f765a4e4b2b80f85f07cbf8fdc7522f0f2ae5a1d19bd7f515e9580da9aa'
+            '9f578c92683684f77f6f5b13ac86ebdc7deaac2f679a6dd8210a08e8238ca31b'
+            'dc8bc88c2edf15ae9bcec432b4ff4371e43fa9bc780132d1dbc6a3cc5700b106'
+            '475150e74087dbc1e1013d5c11eff016e950d7dce7874fda633f25fb306d3f93')
 
 package() {
-        install -Dm755 zramswap.rc.d "$pkgdir/etc/rc.d/zramswap"
+  install -Dm644 "${srcdir}/zram.service" "${pkgdir}/usr/lib/systemd/system/zram.service"
+  install -Dm644 "${srcdir}/zram" "${pkgdir}/etc/default/zram"
+  install -Dm755 "${srcdir}/zramstart" "${pkgdir}/usr/sbin/zramstart"
+  install -Dm755 "${srcdir}/zramstop" "${pkgdir}/usr/sbin/zramstop"
 }

zramswap/zram

@@ -0,0 +1,4 @@
+# The factor is how much (from 0 to 100, percentage)
+# of system RAM to allocate to ZRAM block devices
+# Too big, and your system will start killing off processes
+FACTOR=90

zramswap/zram.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Enable compressed swap in memory using zram
+After=multi-user.target
+
+[Service]
+RemainAfterExit=yes
+ExecStart=/usr/sbin/zramstart
+ExecStop=/usr/sbin/zramstop
+Type=oneshot
+
+[Install]
+WantedBy=multi-user.target

zramswap/zramstart

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+num_cpus=$(grep -c processor /proc/cpuinfo)
+[ "$num_cpus" != 0 ] || num_cpus=1
+
+last_cpu=$((num_cpus - 1))
+FACTOR=90
+[ -f /etc/default/zram ] && source /etc/default/zram || true
+factor=$FACTOR # percentage
+
+memtotal=$(grep MemTotal /proc/meminfo | awk ' { print $2 } ')
+mem_by_cpu=$(($memtotal/$num_cpus*$factor/100*1024))
+
+modprobe -q zram num_devices=$num_cpus
+
+for i in $(seq 0 $last_cpu); do
+	echo $mem_by_cpu > /sys/block/zram$i/disksize
+	mkswap /dev/zram$i
+	swapon -p 100 /dev/zram$i
+done

zramswap/zramstop

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+num_cpus=$(grep -c processor /proc/cpuinfo)
+[ "$num_cpus" != 0 ] || num_cpus=1
+
+last_cpu=$((num_cpus - 1))
+
+for i in $(seq 0 $last_cpu); do
+	grep -q "/dev/zram$i" /proc/swaps && swapoff /dev/zram$i
+done
+
+sleep 1
+rmmod zram

zramswap/zramswap.install

@@ -1,7 +1,17 @@
 post_install() {
-  echo "Add zramswap to the DAEMONS array in rc.conf"
+  echo "==> To enable zramswap, run 'sudo systemctl enable zram.service'"
+  echo "==> To run the script now, start it with 'sudo systemctl start zram.service'"
 }
 
-post_remove() {
+pre_remove() {
-  echo "Don't forget to remove zramswap from the DAEMONS array in rc.conf"
+  # Stop running services
+  _service="zram.service"
+  systemctl is-active ${_service} &>/dev/null
+  if [[ $? -eq 0 ]] ; then
+    systemctl stop ${_service}
+  fi
+  systemctl is-enabled ${_service} &>/dev/null
+  if [[ $? -eq 0 ]] ; then
+    systemctl disable ${_service}
+  fi
 }

zramswap/zramswap.rc.d

@@ -1,57 +0,0 @@
-#!/bin/bash
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# get the number of CPUs
-num_cpus=$(grep -c processor /proc/cpuinfo)
-# if something goes wrong, assume we have 1
-[[ "$num_cpus" != 0 ]] || num_cpus=1
-
-# set decremented number of CPUs
-decr_num_cpus=$((num_cpus - 1))
-
-case "$1" in
-  start)
-    stat_busy "Enabling zram-based swap"
-    # get the amount of memory in the machine
-    mem_total_kb=$(grep MemTotal /proc/meminfo | grep -E --only-matching '[[:digit:]]+')
-    mem_total=$((mem_total_kb * 1024))
-
-    # load dependency modules
-    modprobe zram zram_num_devices=$num_cpus || modprobe zram num_devices=$num_cpus
-
-    # initialize the devices
-    for i in $(seq 0 $decr_num_cpus); do
-      echo $((mem_total / num_cpus)) > /sys/block/zram$i/disksize
-    done
-
-    # Creating swap filesystems
-    for i in $(seq 0 $decr_num_cpus); do
-      mkswap /dev/zram$i
-    done
-
-    # Switch the swaps on
-    for i in $(seq 0 $decr_num_cpus); do
-      swapon -p 100 /dev/zram$i
-    done
-
-    stat_done
-  ;;
-  stop)
-    stat_busy "Switching off zram-based swap"
-    # Switching off swap
-    for i in $(seq 0 $decr_num_cpus); do
-      if [[ "$(grep /dev/zram$i /proc/swaps)" != "" ]]; then
-        swapoff /dev/zram$i
-      fi
-    done
-
-    rmmod zram
-    stat_done
-  ;;
-  *)
-      echo "usage: $0 {start|stop}"
-esac
-
-exit 0