tor update to 0.2.4.21. updated also torrc file

tor/PKGBUILD

@@ -1,8 +1,8 @@
-# maintainer abveritas@chakra-project.org
+# Maintainer: UtG  <utg[dot]chakra.linux[at]gmail[dot]com>
 # contributor Giuseppe Calà <jiveaxe@gmail.com>
 
 pkgname=tor
-pkgver=0.2.4.20
+pkgver=0.2.4.21
 pkgrel=1
 pkgdesc="Anonymizing overlay network"
 arch=('x86_64')
@@ -16,11 +16,12 @@ option=('!docs' '!emptydirs')
 source=("http://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"
         'torrc'
         'tor.conf.d'
-        'tor.service')
+        'tor.service') 
-md5sums=('a8cd8e3b3a3f6a7770f2c22d280f19b8'
+md5sums=('bde981d10e8faf1e171ef1ebbb7b398a'
-         'c97998c760c4351f12ad41d514071a9b'
+         'bb7b85a70c2997a3e05f023c97768f5e'
          'f656f3e93f0c2ed46464d9b784876dbc'
-         'cf23b97a1da09670214da6229a3ecb09')
+         '98901f7dfa85b352b806ba7b0d66b7d0')
+
 
 build() {
   cd "${srcdir}/${pkgname}-${pkgver}"

tor/tor.service

@@ -1,5 +1,6 @@
 [Unit]
 Description=Anonymizing Overlay Network
+After=network.target
 
 [Service]
 Type=forking

tor/torrc

@@ -1,49 +1,46 @@
-## CONFIGURED FOR CHAKRA LINUX
+## CONFIGURED FOR CHAKRA LINUX  - 2014/04
 
-## Last updated 22 July 2005 for Tor 0.1.0.13.
+## Last updated 22 April 2012 for Tor 0.2.3.14-alpha
-## (May or may not work for older or newer versions of Tor.)
+## (may or may not work for much older or much newer versions of Tor.)
-#
+##
-## See the man page, or http://tor.eff.org/tor-manual.html, for more
+## Lines that begin with "## " try to explain what's going on. Lines
-## options you can use in this file.
+## that begin with just "#" are disabled commands: you can enable them
-#
+## by removing the "#" symbol.
-# On Unix, Tor will look for this file in someplace like "~/.tor/torrc" or
+##
-# "/etc/torrc"
+## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
-#
+## for more options you can use in this file.
-# On Windows, Tor will look for the configuration file in someplace like
+##
-# "Application Data\tor\torrc" or "Application Data\<username>\tor\torrc"
+## On Unix, Tor will look for this file in various places 
-#
+## (like "~/.tor/torrc" or "/etc/torrc") based on your platform:
-# With the default Mac OS X installer, Tor will look in ~/.tor/torrc or
+## https://www.torproject.org/docs/faq#torrc
-# /Library/Tor/torrc
 
-
+## Tor opens a socks proxy on port 9050 by default -- even if you don't
-## Replace this with "SocksPort 0" if you plan to run Tor only as a
+## configure one below. Set "SocksPort 0" if you plan to run Tor only
-## server, and not make any local application connections yourself.
+## as a relay, and not make any local application connections yourself.
 SocksPort 9050 # what port to open for local application connections
 SocksBindAddress 127.0.0.1 # accept connections only from localhost
 #SocksBindAddress 192.168.0.1:9100 # listen on a chosen IP/port too
 
 ## Entry policies to allow/deny SOCKS requests based on IP address.
 ## First entry that matches wins. If no SocksPolicy is set, we accept
-## all (and only) requests from SocksBindAddress.
+## all (and only) requests that reach a SocksPort. Untrusted users who
+## can access your SocksPort may be able to learn about the connections
+## you make.
 #SocksPolicy accept 192.168.0.1/16
 #SocksPolicy reject *
 
-## Allow no-name routers (ones that the dirserver operators don't
-## know anything about) in only these positions in your circuits.
-## Other choices (not advised) are entry,exit,introduction.
-AllowUnverifiedNodes middle,rendezvous
-
 ## Logs go to stdout at level "notice" unless redirected by something
-## else, like one of the below lines. You can have as many log lines as
+## else, like one of the below lines. You can have as many Log lines as
 ## you want.
 ##
+## We advise using "notice" in most cases, since anything more verbose
+## may provide sensitive information to an attacker who obtains the logs.
+##
 ## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
 #Log notice file /var/log/tor/notices.log
-## Send only debug and info messages to /var/log/tor/debug.log
+## Send every possible message to /var/log/tor/debug.log
-#Log debug-info file /var/log/tor/debug.log
+#Log debug file /var/log/tor/debug.log
-## Send ONLY debug messages to /var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
-#Log debug-debug file /var/log/tor/debug.log
-## To use the system log instead of Tor's logfiles, uncomment these lines:
 Log notice syslog
 ## To send all messages to stderr:
 #Log debug stderr
@@ -54,29 +51,26 @@ RunAsDaemon 1
 User tor
 Group tor
 
-## Tor only trusts directories signed with one of these keys, and
-## uses the given addresses to connect to the trusted directory
-## servers. If no DirServer lines are specified, Tor uses the built-in
-## defaults (moria1, moria2, tor26), so you can leave this alone unless
-## you need to change it.
-#DirServer 18.244.0.188:9031 FFCB 46DB 1339 DA84 674C 70D7 CB58 6434 C437 0441
-#DirServer 18.244.0.114:80 719B E45D E224 B607 C537 07D0 E214 3E2D 423E 74CF
-#DirServer 86.59.21.38:80 847B 1F85 0344 D787 6491 A548 92F9 0493 4E4E B85D
-
 ## The directory for keeping all the keys/etc. By default, we store
 ## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
 DataDirectory /var/lib/tor
 
-## The port on which Tor will listen for local connections from Tor controller
+## The port on which Tor will listen for local connections from Tor
-## applications, as documented in control-spec.txt.  NB: this feature is
+## controller applications, as documented in control-spec.txt.
-## currently experimental.
 #ControlPort 9051
+## If you enable the controlport, be sure to enable one of these
+## authentication methods, to prevent attackers from accessing it.
+#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
+#CookieAuthentication 1
 
 ############### This section is just for location-hidden services ###
 
-## Look in .../hidden_service/hostname for the address to tell people.
+## Once you have configured a hidden service, you can look at the
-## HiddenServicePort x y:z says to redirect a port x request from the
+## contents of the file ".../hidden_service/hostname" for the address
-## client to y:z.
+## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the
+## address y:z.
 
 #HiddenServiceDir /var/lib/tor/hidden_service/
 #HiddenServicePort 80 127.0.0.1:80
@@ -84,60 +78,115 @@ DataDirectory /var/lib/tor
 #HiddenServiceDir /var/lib/tor/other_hidden_service/
 #HiddenServicePort 80 127.0.0.1:80
 #HiddenServicePort 22 127.0.0.1:22
-#HiddenServiceNodes moria1,moria2
-#HiddenServiceExcludeNodes bad,otherbad
 
-################ This section is just for servers #####################
+################ This section is just for relays #####################
+#
+## See https://www.torproject.org/docs/tor-doc-relay for details.
 
-## NOTE: If you enable these, you should consider mailing your identity
+## Required: what port to advertise for incoming Tor connections.
-## key fingerprint to the tor-ops, so we can add you to the list of
+#ORPort 9001
-## servers that clients will trust. See
+## If you want to listen on a port other than the one advertised in
-## http://tor.eff.org/doc/tor-doc.html#server for details.
+## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
+## follows.  You'll need to do ipchains or other port forwarding
+## yourself to make this work.
+#ORPort 443 NoListen
+#ORPort 127.0.0.1:9090 NoAdvertise
 
-## Required: A unique handle for this server
+## The IP address or full DNS name for incoming connections to your
-#Nickname ididnteditheconfig
+## relay. Leave commented out and Tor will guess.
-
-## The IP or fqdn for this server. Leave commented out and Tor will guess.
 #Address noname.example.com
 
-## Contact info that will be published in the directory, so we can
+## If you have multiple network interfaces, you can specify one for
-## contact you if you need to upgrade or if something goes wrong.
+## outgoing traffic to use.
-## This is optional but recommended.
+# OutboundBindAddress 10.0.0.5
+
+## A handle for your relay, so people don't have to refer to it by key.
+#Nickname ididnteditheconfig
+
+## Define these to limit how much relayed traffic you will allow. Your
+## own traffic is still unthrottled. Note that RelayBandwidthRate must
+## be at least 20 KB.
+## Note that units for these config options are bytes per second, not bits
+## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
+#RelayBandwidthRate 100 KB  # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
+
+## Use these to restrict the maximum traffic per day, week, or month.
+## Note that this threshold applies separately to sent and received bytes,
+## not to their sum: setting "4 GB" may allow up to 8 GB total before
+## hibernating.
+##
+## Set a maximum of 4 gigabytes each way per period.
+#AccountingMax 4 GB
+## Each period starts daily at midnight (AccountingMax is per day)
+#AccountingStart day 00:00
+## Each period starts on the 3rd of the month at 15:00 (AccountingMax
+## is per month)
+#AccountingStart month 3 15:00
+
+## Contact info to be published in the directory, so we can contact you
+## if your relay is misconfigured or something else goes wrong. Google
+## indexes this, so spammers might also collect it.
 #ContactInfo Random Person <nobody AT example dot com>
 ## You might also include your PGP or GPG fingerprint if you have one:
-#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>
+#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
 
-## Required: what port to advertise for tor connections
+## Uncomment this to mirror directory information for others. Please do
-#ORPort 9001
+## if you have enough bandwidth.
-## If you want to listen on a port other than the one advertised
-## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment
-## the line below. You'll need to do ipchains or other port forwarding
-## yourself to make this work.
-#ORBindAddress 0.0.0.0:9090
-
-## Uncomment this to mirror the directory for others (please do)
 #DirPort 9030 # what port to advertise for directory connections
-## If you want to listen on a port other than the one advertised
+## If you want to listen on a port other than the one advertised in
-## in DirPort (e.g. to advertise 80 but bind 9091), uncomment the line
+## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
-## below. You'll need to do ipchains or other port forwarding yourself
+## follows.  below too. You'll need to do ipchains or other port
-## to make this work.
+## forwarding yourself to make this work.
-#DirBindAddress 0.0.0.0:9091
+#DirPort 80 NoListen
+#DirPort 127.0.0.1:9091 NoAdvertise
+## Uncomment to return an arbitrary blob of html on your DirPort. Now you
+## can explain what Tor is if anybody wonders why your IP address is
+## contacting them. See contrib/tor-exit-notice.html in Tor's source
+## distribution for a sample.
+#DirPortFrontPage /etc/tor/tor-exit-notice.html
+
+## Uncomment this if you run more than one Tor relay, and add the identity
+## key fingerprint of each Tor relay you control, even if they're on
+## different networks. You declare it here so Tor clients can avoid
+## using more than one of your relays in a single circuit. See
+## https://www.torproject.org/docs/faq#MultipleRelays
+## However, you should never include a bridge's fingerprint here, as it would
+## break its concealability and potentionally reveal its IP/TCP address.
+#MyFamily $keyid,$keyid,...
 
 ## A comma-separated list of exit policies. They're considered first
-## to last, and the first match wins. If you want to *replace*
+## to last, and the first match wins. If you want to _replace_
 ## the default exit policy, end this with either a reject *:* or an
-## accept *:*. Otherwise, you're *augmenting* (prepending to) the
+## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
 ## default exit policy. Leave commented to just use the default, which is
-## available in the man page or at http://tor.eff.org/documentation.html
+## described in the man page or at
+## https://www.torproject.org/documentation.html
 ##
-## Look at http://tor.eff.org/faq-abuse.html#TypicalAbuses
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
 ## for issues you might encounter if you use the default exit policy.
 ##
 ## If certain IPs and ports are blocked externally, e.g. by your firewall,
 ## you should update your exit policy to reflect this -- otherwise Tor
 ## users will be told that those destinations are down.
 ##
+## For security, by default Tor rejects connections to private (local)
+## networks, including to your public IP address. See the man page entry
+## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
+##
 #ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
 #ExitPolicy accept *:119 # accept nntp as well as default exit policy
-#ExitPolicy reject *:* # middleman only -- no exits allowed
+#ExitPolicy reject *:* # no exits allowed
 
+## Bridge relays (or "bridges") are Tor relays that aren't listed in the
+## main directory. Since there is no complete public list of them, even an
+## ISP that filters connections to all the known Tor relays probably
+## won't be able to block all the bridges. Also, websites won't treat you
+## differently because they won't know you're running Tor. If you can
+## be a real relay, please do; but if not, be a bridge!
+#BridgeRelay 1
+## By default, Tor will advertise your bridge to users through various
+## mechanisms like https://bridges.torproject.org/. If you want to run
+## a private bridge, for example because you'll give out your bridge
+## address manually to your friends, uncomment this line:
+#PublishServerDescriptor 0