# Configuration options for FreshPlayerPlugin

# This configuration file is optional. Wrapper will search for it first
# in ~/.config/freshwrapper.conf, then in /etc/freshwrapper.conf.
# If wrapper fails to find configuration, it will use default values,
# which you can find below

# Audio buffer is used to continuously provide sound adapter with data.
# Values too low may lead to buffer underruns and stuttering.  Values
# too high will lead to noticeable latency. Usually plugin selects size
# on its own, but you may override bounds here

# lower bound for audio buffer size, in milliseconds
audio_buffer_min_ms = 50

# higher bound of audio buffer size, in milliseconds
audio_buffer_max_ms = 150

# output sound through JACK. If enabled, only JACK will be tried, and if
# your machine doesn't have it, there would be no sound, and no sync
audio_use_jack = 0

# Path to the Pepper Flash plugin.
# If the option is absent, freshwrapper will search for Pepper Flash in
# a number of location where it could be. Usually that's enough, but if
# not, you should manually enter the right path. Multiple paths could
# be specified, separated by colon.
pepperflash_path = "/usr/lib/PepperFlash/libpepflashplayer.so"

# "Command-line" arguments for Flash
flash_command_line = "enable_hw_video_decode=1,enable_stagevideo_auto=1"

# enable 3d and stage 3d
enable_3d = 1

# enable hardware-accelerated video decoding. Requires 3d to really work
enable_hwdec = 1

# when set to 1, limits output to warnings and errors only
quiet = 0

# When multiple monitors with different resolutions are used, size
# of fullscreen window can vary. But some Flash movies request these
# parameters once at startup and rely on them to be correct. By default,
# if zeros are used here, freshwrapper will select minimal width and
# height across all monitors.
fullscreen_width = 0
fullscreen_height = 0

# Enables DNS query case randomization to partially protect against DNS
# poisoning attacks. It was reported that some Mikrotik routers do not
# support this trick. Set parameter to 0 if you have an affected model
randomize_dns_case = 1

# scaling factor (floating point value) used to convert screen pixels
# to device independent pixels. You may need it for displays with
# high DPI
device_scale = 1

# method org.freedesktop.ScreenSaver.SimulateUserActivity() in KDE 5 seems
# to have no effect unless GetSessionIdleTime() called afterwards. Set
# parameter to 1 to call latter
quirk_plasma5_screensaver = 1

# whenever to use windowed plugin mode
enable_windowed_mode = 1

# whenever XEmbed used in windowed mode (if browser advertises its support)
enable_xembed = 1

# if set to 1, fullscreen window will be kept always above browser, and hidden
# from taskbar and pager
tie_fullscreen_window_to_browser = 1