custom_blfs_packages/lfsSetup.sh

#!/bin/bash
# Script that setups LFS installer

set -e

# Helper function to pach the packages.ent
# Parameters are in this order: major, minor, patch, md5 and full path to packages.ent
patchKernelVersion()
{
    if [ ! -f "$5" ] ; then
        echo "The packages.ent file is not exist or not defined." >&2
        echo "File: $5"
        return 4
    fi

    sed -i -E "s@(<\!ENTITY linux-major-version \"+)(.+\">)@\1$1\">@" "$5"
    sed -i -E "s@(<\!ENTITY linux-minor-version \"+)(.+\">)@\1$2\">@" "$5"    
    sed -i -E "s@(<\!ENTITY linux-md5 \"+)(.+\">)@\1$4\">@" "$5"

    if [ "-" == "$3" ] ; then
        sed -i -E '/<!--/ n; /<\!ENTITY linux-patch-version "/{s/<!E/<!--<!E/g;s/">/">-->/g;}' "$5"
        sed -i -E '/linux-minor-version;">-->/{s/<!--//g;s/-->//g;}' "$5"
        sed -i -E '/<!--/ n; /linux-patch-version;">/{s/<!E/<!--<!E/g;s/;">/;">-->/g;}' "$5"
    else
        sed -i -E '/<!ENTITY linux-patch-version "/{s/<!--//g;s/-->//g;}' "$5"
        sed -i -E "s@(<\!ENTITY linux-patch-version \"+)(.+\">)@\1$3\">@" "$5"
        sed -i -E '/linux-patch-version;">-->/{s/<!--//g;s/-->//g;}' "$5"
        sed -i -E '/<!--/ n; /linux-minor-version;">/{s/<!E/<!--<!E/g;s/;">/;">-->/g;}' "$5"
    fi
}

# Function that createst an fstab based on the incoming folder
createFstab()
{
    # Get mount info from lsblk output
    LSBLK_INFO=$(lsblk -l -o MOUNTPOINT,PATH,NAME,PKNAME,PARTUUID,FSTYPE,PTTYPE | sed "/^ /d")

    printf "# Begin /etc/fstab\n\n"
    printf '%-45s    %-11s    %-4s    %-16s    %-4s    %-10s\n' "# File system (PARTUUID)" "mount-point" "type" "options" "dump" "fsck"
    printf '#%104s\n\n' "order"

    # Find the root mount point
    DIR_ROOT=$(grep "^$1 " <<< "$LSBLK_INFO")
    if [ -z "$DIR_ROOT" ] ; then
        DIR_ROOT=$(grep "^/ " <<< "$LSBLK_INFO")
    fi
    if [ -n "$DIR_ROOT" ] ; then
        printf '%-45s    %-11s    %-4s    %-16s    %-4s    %-10s\n' "PARTUUID=$(awk '{print $5}' <<< "$DIR_ROOT")" / "$(awk '{print $6}' <<< "$DIR_ROOT")" defaults 1 1
    fi

    # Find if there is a separate boot drive
    DIR_BOOT=$(grep "^$1/boot " <<< "$LSBLK_INFO")
    if [ -n "$DIR_BOOT" ] ; then
        printf '%-45s    %-11s    %-4s    %-16s    %-4s    %-10s\n' "PARTUUID=$(awk '{print $5}' <<< "$DIR_BOOT")" /boot "$(awk '{print $6}' <<< "$DIR_BOOT")" noauto,defaults 0 0
    fi

    # Find if there is a swap partition
    DIR_SWAP=$(grep "^\[SWAP\] " <<< "$LSBLK_INFO")
    if [ -n "$DIR_SWAP" ] ; then
        printf '%-45s    %-11s    %-4s    %-16s    %-4s    %-10s\n' "PARTUUID=$(awk '{print $5}' <<< "$DIR_SWAP")" swap "$(awk '{print $6}' <<< "$DIR_SWAP")" pri=1 0 0
    fi

    printf "\n# End /etc/fstab\n"
}

# Check if the lfs mount point folder is specified as the first argument
if [ -z "$1" ]
then
    echo "Please specify the lfs mount point folder as the first argument!" >&2
    exit 1
fi

# Check if the lfs folder is exists
if [ ! -d "$1" ]
then
    echo "LFS mount point folder does not exist!" >&2
    exit 2
fi

# Check if jhalfs folder is already exist and delete it if yes
DIR_JHALFS="$1/jhalfs"
if [ -d "$DIR_JHALFS" ]
then
    echo Deleting old jhalfs folder: "$DIR_JHALFS"
    sudo rm -rf "$DIR_JHALFS"
    echo Done!
fi

# Now create the jhalfs folder and book-source sub-folder owned by the current user
DIR_BOOK="$DIR_JHALFS/book-source"
U="$(id -un)" # current user
G="$(id -gn)" # current group
echo Creating jhalfs folder...
sudo install -v -o "$U" -g root -m 1777 -d "$DIR_JHALFS"
sudo install -v -o "$U" -g "$G" -m 1777 -d "$DIR_BOOK"

# Clone the LFS book repository to book-source folder
echo Cloning lfs book sources...
git clone https://git.linuxfromscratch.org/lfs.git "$DIR_BOOK"

# Get the latest kernel version and download link from kernel.org
echo Getting latest kernel from kernel.org...
LATEST_KERNEL_URL="$(curl -v --silent https://www.kernel.org/ 2>&1 | sed -n '/<td id="latest_link">/{n; p}' | cut -d '"' -f 2)"
LATEST_KERNEL_VER="$(cut -d '-' -f 2 <<< "$LATEST_KERNEL_URL" | rev | cut -c8- | rev)"
echo Latest kernel version: "$LATEST_KERNEL_VER"
echo Download URL: "$LATEST_KERNEL_URL"

# Check sources folder existence and create if needed
DIR_SOURCES="$1/sources"
if [ ! -d "$DIR_SOURCES" ] ; then
    sudo install -v -o "$U" -g "$G" -m 1777 -d "$DIR_SOURCES"
else
    sudo chmod -v 1777 "$DIR_SOURCES"
fi

# Download latest kernel if not done yet
KERNEL_FILE_NAME="$(rev <<< "$LATEST_KERNEL_URL" | cut -d '/' -f1 | rev)"
if [ ! -f "$DIR_SOURCES/$KERNEL_FILE_NAME" ] ; then
    echo Downloading kernel tar ball...
    wget -T 30 -t 5 --directory-prefix="$DIR_SOURCES" "$LATEST_KERNEL_URL"
    echo Done!
fi

# Patch packages.ent with latest kernel
MD5_SUM="$(md5sum "$DIR_SOURCES/$KERNEL_FILE_NAME" | cut -d ' ' -f 1)"
NUM_VER_DOTS="$(awk -F. '{print NF-1}' <<< "$LATEST_KERNEL_VER")"
if [ "2" == "$NUM_VER_DOTS" ] ; then
    MAIN_VER="$(awk -F. '{print $(NF-2)}' <<< "$LATEST_KERNEL_VER")"
    MINOR_VER="$(awk -F. '{print $(NF-1)}' <<< "$LATEST_KERNEL_VER")"
    PATCH_VER="$(awk -F. '{print $(NF)}' <<< "$LATEST_KERNEL_VER")"
elif [ "1" == "$NUM_VER_DOTS" ] ; then
    MAIN_VER="$(awk -F. '{print $(NF-1)}' <<< "$LATEST_KERNEL_VER")"
    MINOR_VER="$(awk -F. '{print $(NF)}' <<< "$LATEST_KERNEL_VER")"
    PATCH_VER="-"
else
    echo Invalid count of version dots: "$NUM_VER_DOTS" >&2
    echo Where version number is: "$LATEST_KERNEL_VER" >&2
    exit 3
fi
patchKernelVersion "$MAIN_VER" "$MINOR_VER" "$PATCH_VER" "$MD5_SUM" "$DIR_BOOK/packages.ent"

# Check for the kernel config and try to create it based on a previous one if not found
KERNEL_CONFIG="$HOME/config-$LATEST_KERNEL_VER"
if [ ! -f "$KERNEL_CONFIG" ] ; then
    # Look for older config files in the user's home directory
    CONFIG_FILE=$(find /boot "$HOME" -type f -iwholename "$HOME/config-*" -o -iwholename "/boot/config-*")
    if [ -z "$CONFIG_FILE" ] ; then
        echo "Cannot find $KERNEL_CONFIG and also no old configs found to create it."
        exit 4
    fi

    # Select the most recent file based on modification date if there are more
    CONFIG_FILE=$(ls -Art $CONFIG_FILE | tail -n1)
    echo "Using the following old config: $CONFIG_FILE"

    # Extract the latest kernel tar ball and run 'make oldconfig'
    ORIG_FOLDER=$(pwd)
    cd "$DIR_SOURCES"
    if [ -d "linux-$LATEST_KERNEL_VER" ] ; then
        rm -rf "linux-$LATEST_KERNEL_VER"
    fi
    tar -xf "$KERNEL_FILE_NAME"
    cd "linux-$LATEST_KERNEL_VER"
    cp -v "$CONFIG_FILE" .config
    make oldconfig

    # After config created based on old config, copy it back to user's folder
    cp -v .config "$HOME/config-$LATEST_KERNEL_VER"

    # Go back to original folder and delete unpacked linux folder in sources
    cd "$ORIG_FOLDER"
    rm -rf "$DIR_SOURCES/linux-$LATEST_KERNEL_VER"
fi

# Check for possible needed firmwares defined in kernel config
FIRMWARE_FILES=$(grep "$KERNEL_CONFIG" -e 'CONFIG_EXTRA_FIRMWARE="' | awk -F'"' '{print $2}')
if [ -n "$FIRMWARE_FILES" ] ; then
    #sudo mkdir -pv $(dirname $(sed "s|^|$1/usr/lib/firmware/|g;s| | $1/usr/lib/firmware/|g" <<< "$FIRMWARE_FILES"))
    DIR_FIRMWARE=/usr/lib/firmware/
    for FX in $(tr ' ' '\n' <<< "$FIRMWARE_FILES") ; do sudo mkdir -pv "$(dirname "$1$DIR_FIRMWARE$FX")" ; sudo cp -fv "$DIR_FIRMWARE$FX" "$1$DIR_FIRMWARE$FX" ; done
fi

# Check if setup folder is already exist and delete it if yes
DIR_SETUP="$1/setup"
if [ -d "$DIR_SETUP" ]
then
    echo Deleting old setup folder: "$DIR_SETUP"
    sudo rm -rf "$DIR_SETUP"
    echo Done!
fi

# Now create the setup folder owned by the current user
echo Creating setup folder...
sudo install -v -o "$U" -g "$G" -m 755 -d "$DIR_SETUP"

# Clone the jhalfs repository to setup folder
echo Cloning jhalfs sources...
git clone https://git.linuxfromscratch.org/jhalfs.git "$DIR_SETUP"

# Patch opt_config to use -O3 -pipe -march=native
echo Patching optimization config file...
sed -i -E '/DEF_OPT_MODE=/s/noOpt/O3pipe_march/g' "$DIR_SETUP/optimize/opt_config"

# Copy jhalfs config file and adjust some settings in it
cp -iv lfs_configs/configuration "$DIR_SETUP/"
echo Patching setup configuration file...
FILE_CFG="$DIR_SETUP/configuration"
sed -i -E "\@BUILDDIR=\"xxx\"@s@xxx@$1@g" "$FILE_CFG"
#sed -i -E "\@FSTAB=\"xxx\"@s@xxx@/home/$U/fstab@g" "$FILE_CFG"
sed -i -E "/^FSTAB=/s/^/#/g" "$FILE_CFG"
sed -i -E "\@FSTAB=\"xxx\"@s@xxx@/home/$U/fstab@g" "$FILE_CFG"
sed -i -E "\@CONFIG=\"xxx\"@s@xxx@/home/$U/config-$LATEST_KERNEL_VER@g" "$FILE_CFG"
sed -i -E "\@KEYMAP=\"xxx\"@s@xxx@$(localectl | grep Keymap | awk -F' ' '{printf $NF}')@g" "$FILE_CFG"

# Add additional blfs packages to build config if specified any
BLFS_PACKS=postlfs-config-profile,postlfs-config-vimrc
if [ -n "$2" ] ; then
    BLFS_PACKS="$BLFS_PACKS,$2"
fi
SCRIPT_DIR="$DIR_SETUP/common/libs/func_install_blfs"
LINE_NUMBER=$(grep "$SCRIPT_DIR" -e '$LINE_SUDO' -n -m1 | cut -d: -f1)
ADDITIONAL_CONFIGS=$(sed 's/,/\n/g' <<< "$BLFS_PACKS" | sed 's/$/=y/' | sed 's/^/CONFIG_/' | sed '$!s/$/\\/')
sed -i "$((LINE_NUMBER+1))i$ADDITIONAL_CONFIGS" "$SCRIPT_DIR"
#sed -i "/^MAIL_SERVER=/i MS_sendmail=y" "$SCRIPT_DIR"
#sed -i "/^MAIL_SERVER=/a DEPLVL_2=y" "$SCRIPT_DIR"
#sed -i "/^SUDO=/c SUDO=y" "$SCRIPT_DIR"

# Patch master.sh to run also the grub config related script
sed -i '/^ .*10\*grub/s/^/#/g' "$DIR_SETUP/LFS/master.sh"

# Enter to setup folder and start installer
cd "$DIR_SETUP"
yes "yes" | ./jhalfs run

# Patch network script
DIR_COMMANDS="$DIR_JHALFS/lfs-commands"
NET_SCRIPT=$(find "$DIR_COMMANDS" -type f -iname "*-network")
if [ -n "$NET_SCRIPT" ] ; then
    sed -i "s/-static/0/g" "$NET_SCRIPT"
    sed -i "/^\(Gateway\)\|\(Address\)\|\(DNS\)\|\(Domains\)=/d" "$NET_SCRIPT"
    sed -i "/^\[Network\]/a DHCP=yes" "$NET_SCRIPT"
    sed -i "s/^.*PKR-LINUX.local/127.0.0.1 PKR-LINUX.local/" "$NET_SCRIPT"
    
    if [[ $2 == *"wpa_supplicant"* ]] ; then
        sed -i "/^cat > \/etc\/systemd\/network/i cat > /etc/systemd/network/20-wlan0.network << \"EOF\"\n\[Match\]\nName=wlan0\n\n\[Network\]\nDHCP=yes\nEOF" "$NET_SCRIPT"
        sed -i "/20-wlan0.network/i mkdir -pv /etc/wpa_supplicant\ncat > /etc/wpa_supplicant/wpa_supplicant-wlan0.conf << \"EOF\"\nnetwork=\{\nssid=\"T-E797F1\"\n#psk=\"Q2729eq9338qQJ7s\"\npsk=a41c0853c906d7db271a007af55afa9dce2efa8efa994d614b2d7b1d0b38bc72\n\}\nEOF" "$NET_SCRIPT"
    fi
fi

# Patch fstab script
FSTAB_SCRIPT=$(find "$DIR_COMMANDS" -type f -iname "*-fstab")
if [ -n "$FSTAB_SCRIPT" ] ; then
    sed -i '/^cat /,/^EOF/{/^cat /!{/^EOF/!d}}' "$FSTAB_SCRIPT"
    sed -i "/^cat /a $(createFstab "$1" | sed '$!s/$/\\/')" "$FSTAB_SCRIPT"
fi

# Patch LFS kernel script to keep build folder and add new user
KERNEL_SCRIPT=$(find "$DIR_COMMANDS" -type f -iname "*-kernel")
sed -i "/^rm -rf \$PKGDIR/s/^/#/" "$KERNEL_SCRIPT"
sed -i "/^EOF$/a # Add new user\ngroupadd pkr\nuseradd -s /bin/bash -g pkr -m -k /dev/null pkr\nusermod -a -G audio,video,input,systemd-journal pkr\npasswd -s pkr <<< pkr\npasswd -s root <<< root" "$KERNEL_SCRIPT"

# Check if wpa_supplicant is required and patch its install script if yes
if [[ $2 == *"wpa_supplicant"* ]] ; then
    sed -i "/wpa_supplicant@/s/@.*/@wlan0/" "$(find "$1/blfs_root/scripts/" -type f -iname "*-wpa_supplicant")"
fi

# Patch grub script
GRUB_SCRIPT=$(find "$DIR_COMMANDS" -type f -iname "1*-grub")
if [ -n "$GRUB_SCRIPT" ] ; then
    sed -i "/^cat /i grub-install $(lsblk -l -o MOUNTPOINT,PATH,NAME,PKNAME | grep "^$1 " | awk '{gsub($3,$4,$2); print $2}')\n" "$GRUB_SCRIPT"
    KERNEL_NAME=$(grep "$GRUB_SCRIPT" -e vmlinuz | awk '{gsub("/boot/","",$2); print $2}')
    sed -i "/menuentry/a\    set opts=\"net.ifnames=0\ nvidia_drm.modeset=1\"\n    set lnx_root=\"$(lsblk -l -o MOUNTPOINT,PARTUUID | grep "^$1 " | awk '{print $2}')\"\n    set knl_name=\"/$KERNEL_NAME\"" "$GRUB_SCRIPT"
    if [ -z "$(lsblk -l -o MOUNTPOINT,PATH | grep "^$1/boot " | awk '{print $2}')" ] ; then
        sed -i 's/knl_name="/knl_name="\/boot/g' "$GRUB_SCRIPT"
    fi
    BOOT_FS=$(lsblk -l -o MOUNTPOINT,UUID | grep "^$1/boot " | awk '{print $2}')
    if [ -z "$BOOT_FS" ] ; then
        BOOT_FS=$(lsblk -l -o MOUNTPOINT,UUID | grep "^$1 " | awk '{print $2}')
    fi
    sed -i "/set root=/c\search --set=root --fs-uuid $BOOT_FS" "$GRUB_SCRIPT"
    sed -i "/^ .*linux /c\    linux \${knl_name} root=PARTUUID=\${lnx_root} ro \${opts}" "$GRUB_SCRIPT"
    sed -i '/set timeout/a set color_normal=white/black\nset color_highlight=yellow/black\nset menu_color_normal=light-blue/black\nset menu_color_highlight=yellow/blue' "$GRUB_SCRIPT"
fi

# Enter to jhalfs folder and start the build
cd "$DIR_JHALFS"
make

# Patch the sudoers file
sudo sed -i "/^root ALL=(ALL:ALL) ALL/a pkr ALL=(ALL:ALL) NOPASSWD: ALL" "$1/etc/sudoers"

# Move blfs folder to pkr home folder
sudo mv -v "$1/blfs_root" "$1/home/pkr/"
sudo chown -hR pkr:pkr "$1/home/pkr/blfs_root"
sudo chown -hR pkr:pkr "$1/var/lib/jhalfs"
sudo sed -i "s|/blfs_root/packdesc.dtd|/home/pkr/blfs_root/packdesc.dtd|g" "$1/var/lib/jhalfs/BLFS/instpkg.xml"

# Create autologin script to run blfs build after reboot
DIR_AUTOLOGIN="$1/etc/systemd/system/getty@tty1.service.d"
sudo mkdir -pv "$DIR_AUTOLOGIN"
printf "[Service]\nType=simple\nExecStart=\nExecStart=-/sbin/agetty --autologin pkr %%I 38400 linux\n" | sudo tee "$DIR_AUTOLOGIN/override.conf" > /dev/null

cat > "$1/home/pkr/.profile" << EOF
#!/bin/bash
cd "$HOME/blfs_root/blfs-xml"
git reset --hard
git clean -xfd
cd "$HOME/blfs_root/lfs-xml"
git reset --hard
git clean -xfd
cd "$HOME/blfs_root"
make update
. gen_pkg_book.sh <<< yes
cd work
../gen-makefile.sh
make
EOF

# Create new blfs config
cd "$1/home/pkr/blfs_root"
rm -fv configuration
cat > configuration << EOF
CONFIG_pciutils=y
CONFIG_twm=y
CONFIG_xinit=y
CONFIG_xorg-evdev-driver=y
CONFIG_xorg-libinput-driver=y
CONFIG_xwayland=y
CONFIG_sddm=y
CONFIG_openbox=y
CONFIG_lxqt-menu-data=y
CONFIG_lxqt-panel=y
CONFIG_lxqt-post-install=y
CONFIG_lxqt-pre-install=y
CONFIG_lxqt-runner=y
CONFIG_lxqt-session=y
CONFIG_lxqt-sudo=y
CONFIG_lxqt-themes=y
CONFIG_pcmanfm-qt=y
CONFIG_lxqt-notificationd=y
CONFIG_pavucontrol-qt=y
CONFIG_qterminal=y
CONFIG_firefox=y

# Build settings
MS_sendmail=y
MAIL_SERVER="sendmail"
DEPLVL_2=y
optDependency=2
LANGUAGE="hu_HU.UTF-8"
SUDO=y
DEL_LA_FILES=y

# Build Layout
SRC_ARCHIVE="/sources"
BUILD_ROOT="/sources"
BUILD_SUBDIRS=y

# Optimization
JOBS=0
CFG_CFLAGS=" -O3 -pipe -march=native "
CFG_CXXFLAGS=" -O3 -pipe -march=native "
CFG_LDFLAGS="EMPTY"
EOF