Update to gcc-13.1.

general/prog/gcc.xml

@@ -7,10 +7,10 @@
   <!ENTITY gcc-download-http  "&gnu-http;/gcc/gcc-&gcc-version;/gcc-&gcc-version;.tar.xz">
   <!ENTITY gcc-download-ftp   "&gnu-ftp;/gcc/gcc-&gcc-version;/gcc-&gcc-version;.tar.xz">
   <!-- Update this also on the grub-uefi page -->
-  <!ENTITY gcc-md5sum         "73bafd0af874439dcdb9fc063b6fb069">
-  <!ENTITY gcc-size           "81 MB">
-  <!ENTITY gcc-buildsize      "10.5 GB (2.4 GB installed with all listed languages; add 1.3 GB for tests)">
-  <!ENTITY gcc-time           "32 SBU (add 66 SBU for tests; both with parallelism=4)">
+  <!ENTITY gcc-md5sum         "43e4de77f2218c83ca675257ea1af9ef">
+  <!ENTITY gcc-size           "83 MB">
+  <!ENTITY gcc-buildsize      "9.6 GB (2.4 GB installed with all listed languages; add 1.4 GB for tests)">
+  <!ENTITY gcc-time           "32 SBU (add 55 SBU for tests; both with parallelism=4)">
 ]>
 
 <sect1 id="gcc" xreflabel="GCC-&gcc-version;">
@@ -29,15 +29,15 @@
     <para>
       The <application>GCC</application> package contains the GNU Compiler
       Collection. This page describes the installation of compilers for the
-      following languages: C, C++, Fortran, Objective C, Objective C++, and Go.
+      following languages: C, C++, Fortran, Objective C, Objective C++, Go, and Modula2.
       Since C and C++ are installed in LFS, this page is either for upgrading
       C and C++, or for installing additional compilers.
     </para>
 
     <note>
       <para>
-        Additional languages, among which D and ADA, are available in the
-        collection. D and ADA have a binary bootstrap requirement for the first
+        Additional languages, among which D and Ada, are available in the
+        collection. D and Ada have a binary bootstrap requirement for the first
         installation, so their installation is not described here. To install
         them, you can proceed along the same lines as below after installing
         the corresponding compiler from a binary package, adding
@@ -63,7 +63,7 @@
         headers from the ones used when <application>Glibc</application> was
         compiled during LFS.
       </para>
-
+<!--
       <para>
         Some system headers need to be fixed to be used with GCC. This is done
         during the installation of GCC, and the <quote>fixed</quote> headers
@@ -80,6 +80,7 @@
          /usr/libexec/gcc/x86_64-pc-linux-gnu/&gcc-version;/install-tools/mkheaders
         </command>. The machine triplet may be different on a 32-bit system.
       </para>
+-->
     </caution>
 
     <bridgehead renderas="sect3">Package Information</bridgehead>
@@ -115,7 +116,7 @@
         </para>
       </listitem>
     </itemizedlist>
-
+<!--
     <bridgehead renderas="sect3">Additional Downloads</bridgehead>
     <itemizedlist spacing="compact">
       <listitem>
@@ -125,7 +126,7 @@
         </para>
       </listitem>
     </itemizedlist>
-
+-->
     <bridgehead renderas="sect3">GCC Dependencies</bridgehead>
 
     <bridgehead renderas="sect4">Optional</bridgehead>
@@ -171,7 +172,7 @@
       bootstrap anyway, add <parameter>--disable-bootstrap</parameter> to the
       <command>./configure</command> options below.
     </para>
-
+<!--
     <para>
       Some packages checks on the phrase <literal>gccgo</literal> in the output
       of <command>go version</command> to see which kind of Go compiler is
@@ -184,7 +185,7 @@
     </para>
 
 <screen><userinput>patch -Np1 -i ../gcc-&gcc-version;-fix_go_version-1.patch</userinput></screen>
-
+-->
     <para>
       Install <application>GCC</application> by running the following commands:
     </para>
@@ -204,20 +205,20 @@ cd    build                                            &amp;&amp;
     --with-system-zlib    \
     --enable-default-pie  \
     --enable-default-ssp  \
-    --enable-languages=c,c++,fortran,go,objc,obj-c++ &amp;&amp;
+    --disable-fixincludes \
+    --enable-languages=c,c++,fortran,go,objc,obj-c++,m2 &amp;&amp;
 make</userinput></screen>
 
     <para>
       If you have installed additional packages such as
-      <application>Valgrind</application> and <application>GDB</application>,
-      the <application>GCC</application> part of the test suite will run more
+      <application>valgrind</application> and <application>gdb</application>,
+      the <application>gcc</application> part of the test suite will run more
       tests than in LFS. Some of those will report FAIL and others XPASS
-      (pass when expected to FAIL). As of gcc-12.2.0, about 60 FAIL occur
+      (pass when expected to FAIL). As of gcc-13.1.0, about 60 FAIL occur
       in the <quote>guality</quote> suite, as well as miscellaneous failures
-      throughout the rest of the test suite, fifteen of which are already
-      present in the GCC tests of LFS. If all the compilers above are
-      built, there will be around 80 unexpected failures out of over
-      482,000 tests. To run the tests, issue:
+      throughout the rest of the test suite.
+      If all the compilers above are built, there will be a little over 80 
+      unexpected failures out of over 478,000 tests. To run the tests, issue:
     </para>
 
 <screen><userinput>ulimit -s 32768 &amp;&amp;
@@ -298,10 +299,10 @@ ln -sfv ../../libexec/gcc/$(gcc -dumpmachine)/&gcc-version;/liblto_plugin.so /us
     </para>
 
     <para>
-      <parameter>--enable-languages=c,c++,fortran,go,objc,obj-c++</parameter>:
+      <parameter>--enable-languages=c,c++,fortran,go,objc,obj-c++,m2</parameter>:
       This command identifies which languages to build. You may modify
       this command to remove undesired languages. Other languages can be
-      added, including ADA, D, BRIG (add
+      added, including Ada, D, BRIG (add
       <parameter>brig</parameter> to the list of enabled languages), a binary
       format for HSAIL (Heterogeneous System Architecture Intermediate
       Language), and JIT (add <parameter>jit</parameter> to the list of enabled

introduction/welcome/changelog.xml

@@ -38,6 +38,16 @@
       </itemizedlist>
     </listitem>
     -->
+   <listitem>
+     <para>May 1st, 2023</para>
+     <itemizedlist>
+       <listitem>
+         <para>[bdubbs] - Update to gcc-13.1. Fixes
+         <ulink url="&blfs-ticket-root;17983">#17983</ulink>.</para>
+       </listitem>
+     </itemizedlist>
+   </listitem>
+
    <listitem>
      <para>April 30th, 2023</para>
      <itemizedlist>

packages.ent

@@ -314,7 +314,7 @@ to avoid building libxml2 twice, which is slow with all deps -->
 <!ENTITY cmake-minor-version          "3">
 <!ENTITY cmake-version                "&cmake-major-version;.&cmake-minor-version;">
 <!ENTITY doxygen-version              "1.9.6">
-<!ENTITY gcc-version                  "12.2.0">
+<!ENTITY gcc-version                  "13.1.0">
 <!ENTITY gc-version                   "8.2.2">
 <!ENTITY gdb-version                  "13.1">
 <!ENTITY git-version                  "2.40.1">