glfs/server/other/openldap.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY openldap-download-http "https://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-&openldap-version;.tgz">
  <!ENTITY openldap-download-ftp  " ">
  <!ENTITY openldap-md5sum        "5259e75484be71563e3f5c33d64a274d">
  <!ENTITY openldap-size          "6.2 MB">
  <!ENTITY openldap-buildsize     "60 MB (client and server)">
  <!ENTITY openldap-time          "0.4 SBU (client), 1.1 SBU (server)">
]>

<sect1 id="openldap" xreflabel="OpenLDAP-&openldap-version;">
  <?dbhtml filename="openldap.html"?>


  <title>OpenLDAP-&openldap-version;</title>

  <indexterm zone="openldap">
    <primary sortas="a-OpenLDAP">OpenLDAP</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to OpenLDAP</title>

    <para>
      The <application>OpenLDAP</application> package provides an open
      source implementation of the Lightweight Directory Access Protocol.
    </para>

    &lfs120_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&openldap-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&openldap-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &openldap-md5sum;
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &openldap-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &openldap-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &openldap-time;
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Required patch:
          <ulink url="&patch-root;/openldap-&openldap-version;-consolidated-1.patch"/>
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">OpenLDAP Dependencies</bridgehead>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="cyrus-sasl"/>
    </para>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="gnutls"/>,
      <xref linkend="pth"/>,
      <xref linkend="unixodbc"/>,
        <xref linkend="mariadb"/> or
        <xref linkend="postgresql"/> or
        <ulink url="https://www.mysql.com/">MySQL</ulink>,
      <ulink url="http://www.openslp.org/">OpenSLP</ulink>,
      <ulink url="https://docs.mongodb.com/manual/core/wiredtiger/">WiredTiger</ulink>, and
      <xref linkend="db"/> (for slapd, but deprecated)
    </para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of OpenLDAP</title>

    <note>
      <para>
        If you only need to install the client side <command>ldap*</command>
        binaries, corresponding man pages, libraries and header files (referred
        to as a <quote>client-only</quote> install), issue these commands
        instead of the following ones (no test suite available):
      </para>

<screen role="nodump"><userinput>patch -Np1 -i ../openldap-&openldap-version;-consolidated-1.patch &amp;&amp;
autoconf &amp;&amp;

./configure --prefix=/usr     \
            --sysconfdir=/etc \
            --disable-static  \
            --enable-dynamic  \
            --enable-versioning=yes  \
            --disable-debug   \
            --disable-slapd &amp;&amp;

make depend &amp;&amp;
make</userinput></screen>

    <para>
      Then, as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="nodump"><userinput>make install</userinput></screen>

    </note>

    <para>
      There should be a dedicated user and group to take control
      of the <command>slapd</command> daemon after it is
      started. Issue the following commands as the
      <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>groupadd -g 83 ldap &amp;&amp;
useradd  -c "OpenLDAP Daemon Owner" \
         -d /var/lib/openldap -u 83 \
         -g ldap -s /bin/false ldap</userinput></screen>

    <para>
      Install <application>OpenLDAP</application> by
      running the following commands:
    </para>

<screen><userinput>patch -Np1 -i ../openldap-&openldap-version;-consolidated-1.patch &amp;&amp;
autoconf &amp;&amp;

./configure --prefix=/usr         \
            --sysconfdir=/etc     \
            --localstatedir=/var  \
            --libexecdir=/usr/lib \
            --disable-static      \
            --enable-versioning=yes \
            --disable-debug       \
            --with-tls=openssl    \
            --with-cyrus-sasl     \
            --without-systemd     \
            --enable-dynamic      \
            --enable-crypt        \
            --enable-spasswd      \
            --enable-slapd        \
            --enable-modules      \
            --enable-rlookups     \
            --enable-backends=mod \
            --disable-sql         \
            --disable-wt          \
            --enable-overlays=mod &amp;&amp;

make depend &amp;&amp;
make</userinput></screen>

    <para>
      The tests are fragile, and errors may cause the tests to abort
      prior to finishing. Some errors may happen due to timing problems.
      The tests take around an hour, and the time is CPU independent due
      to delays in the tests. On most systems, the tests will run up to the
      <filename>test065-proxyauth for mdb</filename> test.
      To test the results, issue: <command>make test</command>.
    </para>

    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>make install &amp;&amp;

sed -e "s/\.la/.so/" -i /etc/openldap/slapd.{conf,ldif}{,.default} &amp;&amp;

install -v -dm700 -o ldap -g ldap /var/lib/openldap     &amp;&amp;

install -v -dm700 -o ldap -g ldap /etc/openldap/slapd.d &amp;&amp;
chmod   -v    640     /etc/openldap/slapd.{conf,ldif}   &amp;&amp;
chown   -v  root:ldap /etc/openldap/slapd.{conf,ldif}   &amp;&amp;

install -v -dm755 /usr/share/doc/openldap-&openldap-version; &amp;&amp;
cp      -vfr      doc/{drafts,rfc,guide} \
                  /usr/share/doc/openldap-&openldap-version;</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/static-libraries.xml"/>

    <para>
      <parameter>--disable-debug</parameter>: This switch disables
      the debugging code in <application>OpenLDAP</application>.
    </para>

    <para>
      <parameter>--enable-dynamic</parameter>: This switch forces the
      <application>OpenLDAP</application> libraries to be dynamically
      linked to the executable programs.
    </para>

    <para>
      <parameter>--enable-versioning</parameter>: This switch enables
      symbol versioning in the <application>OpenLDAP</application> libraries.
      Without this, some applications might generate a warning about missing symbol versions.
    </para>

    <para>
      <parameter>--enable-crypt</parameter>: This switch enables using
      <command>crypt(3)</command> passwords.
    </para>

    <para>
      <parameter>--enable-spasswd</parameter>: This switch enables
      <application>SASL</application> password verification.
    </para>

    <para>
      <parameter>--enable-modules</parameter>: This switch enables dynamic
      module support.
    </para>

    <para>
      <parameter>--enable-rlookups</parameter>: This switch enables
      reverse lookups of client hostnames.
    </para>

    <para>
      <parameter>--enable-backends</parameter>: This switch enables
      all available backends.
    </para>

    <para>
      <parameter>--enable-overlays</parameter>: This switch enables
      all available overlays.
    </para>

<!--
    <para>
      <parameter>- -disable-ndb</parameter>: This switch disables
      <application>MySQL</application> NDB Cluster backend
      which causes configure to fail if
      <application>MySQL</application> is present.
    </para>
-->

    <para>
      <parameter>--disable-sql</parameter>: This switch explicitly
      disables the SQL backend.  Omit this switch if a SQL server is
      installed and you are going to use a SQL backend.
    </para>

    <para>
      <parameter>--disable-wt</parameter>: This switch explicitly
      disables the WiredTiger backend.  Omit this switch if WiredTiger is
      installed and you are going to use a WiredTiger backend.
    </para>

    <para>
     <parameter>--libexecdir=/usr/lib</parameter>: This switch controls where
     the <filename class="directory">/usr/lib/openldap</filename> directory is
     installed.  Everything in that directory is a library, so it belongs under
     <filename class="directory">/usr/lib</filename> instead of
     <filename class="directory">/usr/libexec</filename>.
    </para>

    <para>
      <option>--enable-slp</option>: This switch enables
      SLPv2 support. Use it if you have installed
      <ulink url="http://www.openslp.org/">OpenSLP</ulink>.
    </para>

    <note>
      <para>
        You can run <command>./configure --help</command> to see if there
        are other switch you can pass to the <command>configure</command>
        command to enable other options or dependency packages.
      </para>
    </note>

    <para>
      <command>install ...</command>, <command>chown ...</command>,
      and <command>chmod ...</command>:
      Having slapd configuration files and ldap databases in /var/lib/openldap
      readable by anyone is a SECURITY ISSUE, especially since a file stores the
      admin password in PLAIN TEXT. That's why mode 640 and root:ldap ownership
      were used. The owner is root, so only root can modify the file, and group is
      ldap, so that the group which owns slapd daemon could read but not modify
      the file in case of a security breach.
    </para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring OpenLDAP</title>

    <sect3 id="openldap-config">
      <title>Config Files</title>

      <itemizedlist spacing="compact">
        <listitem>
          <para>
            For LDAP client: <filename>/etc/openldap/ldap.conf</filename> and
            <filename>~/.ldaprc</filename>
          </para>
        </listitem>
        <listitem>
          <para>
            For LDAP server, two configuration mechanisms are used:
            a legacy <filename>/etc/openldap/slapd.conf</filename>
            configuration file and the recommended
            <emphasis>slapd-config</emphasis> system, using an LDIF database
            stored in
            <filename class="directory">/etc/openldap/slapd.d</filename>.
          </para>
        </listitem>
      </itemizedlist>

      <indexterm zone="openldap openldap-config">
        <primary
          sortas="e-etc-openldap-ldap.conf">/etc/openldap/ldap.conf</primary>
      </indexterm>

      <indexterm zone="openldap openldap-config">
        <primary sortas="e-AA.ldaprc">~/.ldaprc</primary>
      </indexterm>

      <indexterm zone="openldap openldap-config">
        <primary
          sortas="e-etc-openldap-slapd.conf">/etc/openldap/slapd.conf</primary>
      </indexterm>

      <indexterm zone="openldap openldap-config">
        <primary
          sortas="e-etc-openldap-slapd.d">/etc/openldap/slapd.d/*</primary>
      </indexterm>

    </sect3>

    <sect3>
      <title>Configuration Information</title>

      <para>
        Configuring the <command>slapd</command> servers can be complex.
        Securing the LDAP directory, especially if you are storing non-public
        data such as password databases, can also be a challenging task. In
        order to set up <application>OpenLDAP</application>, you'll need to
        modify either the <filename>/etc/openldap/slapd.conf</filename>
        file (old method), or the <filename>/etc/openldap/slapd.ldif</filename>
        file and then use <command>ldapadd</command> to create the LDAP
        configuration database in
        <filename class="directory">/etc/openldap/slapd.d</filename>
        (recommended by the OpenLDAP documentation).
      </para>
<!--
      <para>
        The shipped configuration files suppose the loadable modules are
        installed with their <filename class="extension">.la</filename>
        files, which may not be true if you remove those files as instructed
        in <xref linkend="libtool"/>. If this is the case, issue, as the
        <systemitem class="username">root</systemitem> user:
      </para>

<screen role="root"><userinput>sed 's/\.la$/.so/' -i /etc/openldap/slapd.{conf,ldif}{,.default}</userinput></screen>
-->
      <warning>
        <para>
          The instructions above install an empty LDAP structure and a default
          <filename>/etc/openldap/slapd.conf</filename> file, which are
          suitable for testing the build and other packages using LDAP. Do not
          use them on a production server.
        </para>
      </warning>

      <para>
        Resources to assist you with topics such as choosing a directory
        configuration, backend and database definitions, access control
        settings, running as a user other than
        <systemitem class="username">root</systemitem>
        and setting a <command>chroot</command> environment include:
      </para>

      <itemizedlist spacing="compact">
        <listitem>
          <para>
            The <emphasis role="strong">slapd(8)</emphasis> man page.
          </para>
        </listitem>
        <listitem>
          <para>
            The <emphasis role="strong">slapd.conf(5)</emphasis> and
            <emphasis role="strong">slapd-config(5)</emphasis> man pages.
          </para>
        </listitem>
        <listitem>
          <para>
            The <ulink url="https://www.openldap.org/doc/admin26/"> OpenLDAP 2.6
            Administrator's Guide</ulink> (also installed locally in
            <filename class="directory">
            /usr/share/doc/openldap-&openldap-version;/guide/admin</filename>).
          </para>
        </listitem>
        <listitem>
          <para>
            Documents located at
            <ulink url="https://www.openldap.org/pub/"/>.
          </para>
        </listitem>
      </itemizedlist>

    </sect3>

<!--
    <sect3>
      <title>Mozilla Address Directory</title>

      <para>
        By default, LDAPv2 support is disabled in the
        <filename>slapd.conf</filename> file. Once the database is properly
        set up and <application>Mozilla</application> is configured to use the
        directory, you must add <option>allow bind_v2</option> to the
        <filename>slapd.conf</filename> file.
      </para>

    </sect3>
 -->

    <sect3 id="openldap-init">
      <title><phrase revision="sysv">Boot Script</phrase>
             <phrase revision="systemd">Systemd Unit</phrase></title>

      <para>
        To automate the startup of the LDAP server at system bootup,
        install the
        <phrase revision="sysv"><filename>/etc/rc.d/init.d/slapd</filename>
        init script</phrase>
        <phrase revision="systemd"><filename>slapd.service</filename>
        unit</phrase> included in the
        <xref linkend="bootscripts" revision="sysv"/>
        <xref linkend="systemd-units" revision="systemd"/>
        package using the following command:
      </para>

      <indexterm zone="openldap openldap-init">
        <primary sortas="f-slapd">slapd</primary>
      </indexterm>

<screen role="root"><userinput>make install-slapd</userinput></screen>

      <note>
        <para>
          You'll need to modify
          <phrase revision="sysv"><filename>/etc/sysconfig/slapd</filename></phrase>
          <phrase revision="systemd"><filename>/etc/default/slapd</filename></phrase>
          to include the parameters needed for your specific configuration. See
          the <command>slapd</command> man page for parameter information.
        </para>
      </note>

    </sect3>

    <sect3>
      <title>Testing the Configuration</title>

      <para>
        Start the LDAP server using
        <phrase revision="sysv">the init script:</phrase>
        <phrase revision="systemd">systemctl:</phrase>
      </para>

<screen role="root" revision="sysv"><userinput>/etc/rc.d/init.d/slapd start</userinput></screen>

<screen role="root" revision="systemd"><userinput>systemctl start slapd</userinput></screen>

      <para>
        Verify access to the LDAP server with the following command:
      </para>

<screen><userinput>ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts</userinput></screen>

      <para>
        The expected result is:
      </para>

<screen><computeroutput># extended LDIF
#
# LDAPv3
# base &lt;&gt; with scope baseObject
# filter: (objectclass=*)
# requesting: namingContexts
#

#
dn:
namingContexts: dc=my-domain,dc=com

# search result
search: 2
result: 0 Success

# numResponses: 2
# numEntries: 1</computeroutput></screen>

    </sect3>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>
          ldapadd, ldapcompare, ldapdelete, ldapexop, ldapmodify, ldapmodrdn,
          ldappasswd, ldapsearch, ldapurl, ldapvc, ldapwhoami, slapacl, slapadd,
          slapauth, slapcat, slapd, slapdn, slapindex, slapmodify, slappasswd,
          slapschema, and slaptest
        </seg>
        <seg>
          liblber.so, libldap.so, and several under /usr/lib/openldap
        </seg>
        <seg>
          /etc/openldap,
          /{usr,var}/lib/openldap, and
          /usr/share/doc/openldap-&openldap-version;
        </seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="ldapadd">
        <term><command>ldapadd</command></term>
        <listitem>
          <para>
            opens a connection to an LDAP server, binds and adds entries
          </para>
          <indexterm zone="openldap ldapadd">
            <primary sortas="b-ldapadd">ldapadd</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapcompare">
        <term><command>ldapcompare</command></term>
        <listitem>
          <para>
            opens a connection to an LDAP server, binds and performs
            a compare using specified parameters
          </para>
          <indexterm zone="openldap ldapcompare">
            <primary sortas="b-ldapcompare">ldapcompare</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapdelete">
        <term><command>ldapdelete</command></term>
        <listitem>
          <para>
            opens a connection to an LDAP server, binds and deletes
            one or more entries
          </para>
          <indexterm zone="openldap ldapdelete">
            <primary sortas="b-ldapdelete">ldapdelete</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapexop">
        <term><command>ldapexop</command></term>
        <listitem>
          <para>
            issues the LDAP extended operation specified by
            oid or one of the  special  keywords  whoami,
            cancel, or refresh
          </para>
          <indexterm zone="openldap ldapexop">
            <primary sortas="b-ldapexop">ldapexop</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapmodify">
        <term><command>ldapmodify</command></term>
        <listitem>
          <para>
            opens a connection to an LDAP server, binds and modifies entries
          </para>
          <indexterm zone="openldap ldapmodify">
            <primary sortas="b-ldapmodify">ldapmodify</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapmodrdn">
        <term><command>ldapmodrdn</command></term>
        <listitem>
          <para>
            opens a connection to an LDAP server, binds and modifies
            the RDN of entries
          </para>
          <indexterm zone="openldap ldapmodrdn">
            <primary sortas="b-ldapmodrdn">ldapmodrdn</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldappasswd">
        <term><command>ldappasswd</command></term>
        <listitem>
          <para>
            is a tool used to set the password of an LDAP user
          </para>
          <indexterm zone="openldap ldappasswd">
            <primary sortas="b-ldappasswd">ldappasswd</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapsearch">
        <term><command>ldapsearch</command></term>
        <listitem>
          <para>
            opens a connection to an LDAP server, binds and performs
            a search using specified parameters
          </para>
          <indexterm zone="openldap ldapsearch">
            <primary sortas="b-ldapsearch">ldapsearch</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapurl">
        <term><command>ldapurl</command></term>
        <listitem>
          <para>
            is a command that allows to either compose or
            decompose LDAP URIs
          </para>
          <indexterm zone="openldap ldapurl">
            <primary sortas="b-ldapurl">ldapurl</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapvc">
        <term><command>ldapvc</command></term>
        <listitem>
          <para>
            verifies LDAP credentials
          </para>
          <indexterm zone="openldap ldapvc">
            <primary sortas="b-ldapvc">ldapvc</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ldapwhoami">
        <term><command>ldapwhoami</command></term>
        <listitem>
          <para>
            opens a connection to an LDAP server, binds and displays
            whoami information
          </para>
          <indexterm zone="openldap ldapwhoami">
            <primary sortas="b-ldapwhoami">ldapwhoami</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapacl">
        <term><command>slapacl</command></term>
        <listitem>
          <para>
            is used to check the behavior of slapd by verifying
            access to directory data according to the access control
            list directives defined in its configuration
          </para>
          <indexterm zone="openldap slapacl">
            <primary sortas="b-slapacl">slapacl</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapadd">
        <term><command>slapadd</command></term>
        <listitem>
          <para>
            is used to add entries specified in LDAP Directory Interchange
            Format (LDIF) to an LDAP database
          </para>
          <indexterm zone="openldap slapadd">
            <primary sortas="b-slapadd">slapadd</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapauth">
        <term><command>slapauth</command></term>
        <listitem>
          <para>
            is used to check the behavior of the slapd
            in mapping identities for authentication and
            authorization purposes, as specified in slapd.conf
          </para>
          <indexterm zone="openldap slapauth">
            <primary sortas="b-slapauth">slapauth</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapcat">
        <term><command>slapcat</command></term>
        <listitem>
          <para>
            is used to generate an LDAP LDIF output based upon the
            contents of a slapd database
          </para>
          <indexterm zone="openldap slapcat">
            <primary sortas="b-slapcat">slapcat</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapd">
        <term><command>slapd</command></term>
        <listitem>
          <para>
            is the standalone LDAP server
          </para>
          <indexterm zone="openldap slapd">
            <primary sortas="b-slapd">slapd</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapdn">
        <term><command>slapdn</command></term>
        <listitem>
          <para>
            checks a list of string-represented DNs based on schema syntax
          </para>
          <indexterm zone="openldap slapdn">
            <primary sortas="b-slapdn">slapdn</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapindex">
        <term><command>slapindex</command></term>
        <listitem>
          <para>
            is used to regenerate slapd indexes based upon the current
            contents of a database
          </para>
          <indexterm zone="openldap slapindex">
            <primary sortas="b-slapindex">slapindex</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapmodify">
        <term><command>slapmodify</command></term>
        <listitem>
          <para>
            modifies entries in a slapd database
          </para>
          <indexterm zone="openldap slapmodify">
            <primary sortas="b-slapmodify">slapmodify</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slappasswd">
        <term><command>slappasswd</command></term>
        <listitem>
          <para>
            is an <application>OpenLDAP</application> password utility
          </para>
          <indexterm zone="openldap slappasswd">
            <primary sortas="b-slappasswd">slappasswd</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slapschema">
        <term><command>slapschema</command></term>
        <listitem>
          <para>
            is used to check schema compliance of the contents
            of a slapd database
          </para>
          <indexterm zone="openldap slapschema">
            <primary sortas="b-slapschema">slapschema</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="slaptest">
        <term><command>slaptest</command></term>
        <listitem>
          <para>
            checks the sanity of the <filename>slapd.conf</filename> file
          </para>
          <indexterm zone="openldap slaptest">
            <primary sortas="b-slaptest">slaptest</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="liblber">
        <term><filename class="libraryfile">liblber.so</filename></term>
        <listitem>
          <para>
            is a set of Lightweight Basic Encoding Rules routines. These
            routines are used by the LDAP library routines to encode and decode
            LDAP protocol elements using the (slightly simplified) Basic
            Encoding Rules defined by LDAP. They are not normally used directly
            by an LDAP application program except in the handling of controls
            and extended operations
          </para>
          <indexterm zone="openldap liblber">
            <primary sortas="c-liblber">liblber.so</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libldap">
        <term><filename class="libraryfile">libldap.so</filename></term>
        <listitem>
          <para>
            supports the LDAP programs and provide functionality for
            other programs interacting with LDAP
          </para>
          <indexterm zone="openldap libldap">
            <primary sortas="c-libldap">libldap.so</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <!--
      <varlistentry id="libldap_r">
        <term><filename class="libraryfile">libldap_r.so</filename></term>
        <listitem>
          <para>
            contains the functions required by the LDAP programs to
            produce the results from LDAP requests
          </para>
          <indexterm zone="openldap libldap_r">
            <primary sortas="c-libldap_r">libldap_r.so</primary>
          </indexterm>
        </listitem>
      </varlistentry>
      -->

    </variablelist>

  </sect2>

</sect1>